[PATCH v2 2/7] bindings: spi-samsung: document the clocks and the clock-name property
From: Andi Shyti <hidden>
Date: 2016-07-08 14:46:36
Also in:
linux-clk, linux-devicetree, linux-samsung-soc, linux-spi
Subsystem:
open firmware and flattened device tree bindings, spi subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Mark Brown, Linus Torvalds
These two properties were not documented but used in the spi dts. Add the related documentation. Signed-off-by: Andi Shyti <redacted> --- Documentation/devicetree/bindings/spi/spi-samsung.txt | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt
index 57d5539..2b7167e 100644
--- a/Documentation/devicetree/bindings/spi/spi-samsung.txt
+++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt@@ -24,6 +24,14 @@ Required SoC Specific Properties: - dma-names: Names for the dma channels. There must be at least one channel named "tx" for transmit and named "rx" for receive. +- clocks: specifies the clock IDs provided to the SPI controller; they are + required for interacting with the controller itself, for synchronizing the bus + and as I/O clock (the latter is required by exynos5433 and exynos7). + +- clock-names: string names of the clocks in the 'clocks' property; the names + mut be "spi", "spi_busclkN" and "spi_ioclk", where N is determined by + "samsung,spi-src-clk". + Required Board Specific Properties: - #address-cells: should be 1.
--
2.8.1