[PATCH 1/2] ASoC: sunxi: Add bindings for sun6i to SPDIF
From: codekipper at gmail.com <hidden>
Date: 2016-07-30 14:27:37
Also in:
alsa-devel, lkml
Subsystem:
open firmware and flattened device tree bindings, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Liam Girdwood, Mark Brown, Linus Torvalds
From: Marcus Cooper <redacted> The A31 SoC uses the same SPDIF block as found in earlier SoCs, but its reset is controlled via a separate reset controller. Signed-off-by: Marcus Cooper <redacted> --- Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
index 13503aa..4fe80f7 100644
--- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt
+++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt@@ -9,6 +9,7 @@ Required properties: - compatible : should be one of the following: - "allwinner,sun4i-a10-spdif": for the Allwinner A10 SoC + - "allwinner,sun6i-a31-spdif": for the Allwinner A31 SoC - reg : Offset and length of the register set for the device.
@@ -25,6 +26,8 @@ Required properties: "apb" clock for the spdif bus. "spdif" clock for spdif controller. + - reset : reset specifier for the ahb reset (A31 and newer only) + Example: spdif: spdif at 01c21000 {
--
2.9.2