[PATCH v3 0/4] Add STM32 Reset Driver

From: Gabriel Fernandez <redacted>

v3:
 - Use the builtin for the register

v2:
 - switch to the non-relaxed variants
 - describe dt-binfings in one place

The STM32 MCUs family IPs can be reset by accessing some registers
from the RCC block.

Gabriel Fernandez (1):
  ARM: dts: stm32f429: add missing #reset-cells of rcc

Maxime Coquelin (3):
  dt-bindings: mfd: Add STM32F4 RCC numeric constants into DT include
    file
  dt-bindings: Document the STM32 reset bindings
  drivers: reset: Add STM32 reset driver

 .../devicetree/bindings/clock/st,stm32-rcc.txt     |  42 ++++++--
 .../devicetree/bindings/reset/st,stm32-rcc.txt     |   6 ++
 arch/arm/boot/dts/stm32f429.dtsi                   |   1 +
 drivers/reset/Makefile                             |   1 +
 drivers/reset/reset-stm32.c                        | 108 +++++++++++++++++++++
 include/dt-bindings/mfd/stm32f4-rcc.h              |  98 +++++++++++++++++++
 6 files changed, 249 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt
 create mode 100644 drivers/reset/reset-stm32.c
 create mode 100644 include/dt-bindings/mfd/stm32f4-rcc.h

-- 
1.9.1