[PATCH v2 4/5] ARM: dts: sun8i-h3: add sun8i-emac ethernet driver
From: clabbe.montjoie@gmail.com (LABBE Corentin)
Date: 2016-07-20 08:05:13
Also in:
linux-devicetree, lkml, netdev
Subsystem:
the rest · Maintainer:
Linus Torvalds
The sun8i-emac is an ethernet MAC hardware that support 10/100/1000 speed. This patch enable the sun8i-emac on the Allwinner H3 SoC Device-tree. The SoC H3 have an internal PHY, so optionals syscon and ephy are set. Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> --- arch/arm/boot/dts/sun8i-h3.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 4a4926b..f5a95ff 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi@@ -626,6 +626,20 @@ status = "disabled"; }; + emac: ethernet at 1c30000 { + compatible = "allwinner,sun8i-h3-emac"; + reg = <0x01c30000 0x104>, <0x01c00030 0x4>; + reg-names = "emac", "syscon"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ahb_rst 17>, <&ahb_rst 66>; + reset-names = "ahb", "ephy"; + clocks = <&bus_gates 17>, <&bus_gates 128>; + clock-names = "ahb", "ephy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller at 01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>,
--
2.7.3