[PATCH 2/4] drm/mediatek: enhance the HDMI driving current
From: CK Hu <hidden>
Date: 2016-07-20 07:15:12
Also in:
dri-devel, linux-mediatek, lkml
Hi, Bibby: One comment inline. On Wed, 2016-07-20 at 12:03 +0800, Bibby Hsieh wrote:
quoted hunk ↗ jump to hunk
From: Junzhi Zhao <redacted> In order to improve 4K resolution performance, we have to enhance the HDMI driving currend when clock rate is greater than 165MHz. Signed-off-by: Junzhi Zhao <redacted> Signed-off-by: Bibby Hsieh <redacted> --- drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c | 89 +++++++++++++++++------- 1 file changed, 63 insertions(+), 26 deletions(-)diff --git a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c index 8a24754..a871c14 100644 --- a/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c +++ b/drivers/gpu/drm/mediatek/mtk_mt8173_hdmi_phy.c@@ -298,32 +298,69 @@ static int mtk_hdmi_pll_set_rate(struct clk_hw *hw, unsigned long rate, (0x1 << PLL_BR_SHIFT), RG_HDMITX_PLL_BP | RG_HDMITX_PLL_BC | RG_HDMITX_PLL_BR); - mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON3, RG_HDMITX_PRD_IMP_EN); - mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, - (0x3 << PRD_IBIAS_CLK_SHIFT) | - (0x3 << PRD_IBIAS_D2_SHIFT) | - (0x3 << PRD_IBIAS_D1_SHIFT) | - (0x3 << PRD_IBIAS_D0_SHIFT), - RG_HDMITX_PRD_IBIAS_CLK | - RG_HDMITX_PRD_IBIAS_D2 | - RG_HDMITX_PRD_IBIAS_D1 | - RG_HDMITX_PRD_IBIAS_D0); - mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON3, - (0x0 << DRV_IMP_EN_SHIFT), RG_HDMITX_DRV_IMP_EN); - mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, - (hdmi_phy->drv_imp_clk << DRV_IMP_CLK_SHIFT) | - (hdmi_phy->drv_imp_d2 << DRV_IMP_D2_SHIFT) | - (hdmi_phy->drv_imp_d1 << DRV_IMP_D1_SHIFT) | - (hdmi_phy->drv_imp_d0 << DRV_IMP_D0_SHIFT), - RG_HDMITX_DRV_IMP_CLK | RG_HDMITX_DRV_IMP_D2 | - RG_HDMITX_DRV_IMP_D1 | RG_HDMITX_DRV_IMP_D0); - mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON5, - (hdmi_phy->ibias << DRV_IBIAS_CLK_SHIFT) | - (hdmi_phy->ibias << DRV_IBIAS_D2_SHIFT) | - (hdmi_phy->ibias << DRV_IBIAS_D1_SHIFT) | - (hdmi_phy->ibias << DRV_IBIAS_D0_SHIFT), - RG_HDMITX_DRV_IBIAS_CLK | RG_HDMITX_DRV_IBIAS_D2 | - RG_HDMITX_DRV_IBIAS_D1 | RG_HDMITX_DRV_IBIAS_D0); + if (rate < 165000000) { + mtk_hdmi_phy_clear_bits(hdmi_phy, HDMI_CON3, + RG_HDMITX_PRD_IMP_EN); + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, + (0x3 << PRD_IBIAS_CLK_SHIFT) | + (0x3 << PRD_IBIAS_D2_SHIFT) | + (0x3 << PRD_IBIAS_D1_SHIFT) | + (0x3 << PRD_IBIAS_D0_SHIFT), + RG_HDMITX_PRD_IBIAS_CLK | + RG_HDMITX_PRD_IBIAS_D2 | + RG_HDMITX_PRD_IBIAS_D1 | + RG_HDMITX_PRD_IBIAS_D0); + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON3, + (0x0 << DRV_IMP_EN_SHIFT), + RG_HDMITX_DRV_IMP_EN); + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, + (hdmi_phy->drv_imp_clk << DRV_IMP_CLK_SHIFT) | + (hdmi_phy->drv_imp_d2 << DRV_IMP_D2_SHIFT) | + (hdmi_phy->drv_imp_d1 << DRV_IMP_D1_SHIFT) | + (hdmi_phy->drv_imp_d0 << DRV_IMP_D0_SHIFT), + RG_HDMITX_DRV_IMP_CLK | RG_HDMITX_DRV_IMP_D2 | + RG_HDMITX_DRV_IMP_D1 | RG_HDMITX_DRV_IMP_D0); + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON5, + (hdmi_phy->ibias << DRV_IBIAS_CLK_SHIFT) | + (hdmi_phy->ibias << DRV_IBIAS_D2_SHIFT) | + (hdmi_phy->ibias << DRV_IBIAS_D1_SHIFT) | + (hdmi_phy->ibias << DRV_IBIAS_D0_SHIFT), + RG_HDMITX_DRV_IBIAS_CLK | + RG_HDMITX_DRV_IBIAS_D2 | + RG_HDMITX_DRV_IBIAS_D1 | + RG_HDMITX_DRV_IBIAS_D0); + } else { + mtk_hdmi_phy_set_bits(hdmi_phy, HDMI_CON3, + RG_HDMITX_PRD_IMP_EN); + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, + (0x6 << PRD_IBIAS_CLK_SHIFT) | + (0x6 << PRD_IBIAS_D2_SHIFT) | + (0x6 << PRD_IBIAS_D1_SHIFT) | + (0x6 << PRD_IBIAS_D0_SHIFT), + RG_HDMITX_PRD_IBIAS_CLK | + RG_HDMITX_PRD_IBIAS_D2 | + RG_HDMITX_PRD_IBIAS_D1 | + RG_HDMITX_PRD_IBIAS_D0); + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON3, + (0xf << DRV_IMP_EN_SHIFT), + RG_HDMITX_DRV_IMP_EN); + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON6, + (hdmi_phy->drv_imp_clk << DRV_IMP_CLK_SHIFT) | + (hdmi_phy->drv_imp_d2 << DRV_IMP_D2_SHIFT) | + (hdmi_phy->drv_imp_d1 << DRV_IMP_D1_SHIFT) | + (hdmi_phy->drv_imp_d0 << DRV_IMP_D0_SHIFT), + RG_HDMITX_DRV_IMP_CLK | RG_HDMITX_DRV_IMP_D2 | + RG_HDMITX_DRV_IMP_D1 | RG_HDMITX_DRV_IMP_D0); + mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON5, + (hdmi_phy->ibias_up << DRV_IBIAS_CLK_SHIFT) | + (hdmi_phy->ibias_up << DRV_IBIAS_D2_SHIFT) | + (hdmi_phy->ibias_up << DRV_IBIAS_D1_SHIFT) | + (hdmi_phy->ibias_up << DRV_IBIAS_D0_SHIFT), + RG_HDMITX_DRV_IBIAS_CLK | + RG_HDMITX_DRV_IBIAS_D2 | + RG_HDMITX_DRV_IBIAS_D1 | + RG_HDMITX_DRV_IBIAS_D0); + }
'if' part and 'else' part looks almost the same. Use variable for difference and merge these two part. For example: if (rate < 165000000) prd_ibias = 0x3; else prd_ibias = 0x6; mtk_hdmi_phy_mask(hdmi_phy, HDMI_CON4, (prd_ibias << PRD_IBIAS_CLK_SHIFT) | (prd_ibias << PRD_IBIAS_D2_SHIFT) | (prd_ibias << PRD_IBIAS_D1_SHIFT) | (prd_ibias << PRD_IBIAS_D0_SHIFT), RG_HDMITX_PRD_IBIAS_CLK | RG_HDMITX_PRD_IBIAS_D2 | RG_HDMITX_PRD_IBIAS_D1 | RG_HDMITX_PRD_IBIAS_D0);
return 0; }
Regards, CK