The high-speed phy on qcom SoCs is controlled via the ULPI
viewport.

Cc: Kishon Vijay Abraham I <redacted>
Cc: <redacted>
Signed-off-by: Stephen Boyd <redacted>
---
 .../devicetree/bindings/phy/qcom,usb-hs-phy.txt    |  83 ++++++
 drivers/phy/Kconfig                                |   8 +
 drivers/phy/Makefile                               |   1 +
 drivers/phy/phy-qcom-usb-hs.c                      | 295 +++++++++++++++++++++
 4 files changed, 387 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
 create mode 100644 drivers/phy/phy-qcom-usb-hs.c

diff --git a/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt
new file mode 100644
index 000000000000..a7bda9186d5b
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,usb-hs-phy.txt

@@ -0,0 +1,83 @@
+Qualcomm's USB HS PHY
+
+PROPERTIES
+
+- compatible:
+    Usage: required
+    Value type: <string>
+    Definition: Should contain "qcom,usb-hs-phy"