[PATCH 63/93] clocksource/drivers/vt8500: Convert init function to return error
From: Daniel Lezcano <hidden>
Date: 2016-07-07 08:22:35
Also in:
lkml
Subsystem:
clocksource, clockevent drivers, the rest · Maintainers:
Daniel Lezcano, Thomas Gleixner, Linus Torvalds
The init functions do not return any error. They behave as the following:
- panic, thus leading to a kernel crash while another timer may work and
make the system boot up correctly
or
- print an error and let the caller unaware if the state of the system
Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.
Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.
Signed-off-by: Daniel Lezcano <redacted>
---
drivers/clocksource/vt8500_timer.c | 26 ++++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c
index ddb4092..1bc8707 100644
--- a/drivers/clocksource/vt8500_timer.c
+++ b/drivers/clocksource/vt8500_timer.c@@ -121,38 +121,48 @@ static struct irqaction irq = { .dev_id = &clockevent, }; -static void __init vt8500_timer_init(struct device_node *np) +static int __init vt8500_timer_init(struct device_node *np) { - int timer_irq; + int timer_irq, ret; regbase = of_iomap(np, 0); if (!regbase) { pr_err("%s: Missing iobase description in Device Tree\n", __func__); - return; + return -ENXIO; } + timer_irq = irq_of_parse_and_map(np, 0); if (!timer_irq) { pr_err("%s: Missing irq description in Device Tree\n", __func__); - return; + return -EINVAL; } writel(1, regbase + TIMER_CTRL_VAL); writel(0xf, regbase + TIMER_STATUS_VAL); writel(~0, regbase + TIMER_MATCH_VAL); - if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ)) + ret = clocksource_register_hz(&clocksource, VT8500_TIMER_HZ); + if (ret) { pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n", - __func__, clocksource.name); + __func__, clocksource.name); + return ret; + } clockevent.cpumask = cpumask_of(0); - if (setup_irq(timer_irq, &irq)) + ret = setup_irq(timer_irq, &irq); + if (ret) { pr_err("%s: setup_irq failed for %s\n", __func__, clockevent.name); + return ret; + } + clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ, MIN_OSCR_DELTA * 2, 0xf0000000); + + return 0; } -CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init); +CLOCKSOURCE_OF_DECLARE_RET(vt8500, "via,vt8500-timer", vt8500_timer_init);
--
1.9.1