[PATCH] ARM: dts: sun7i: Add BCM53125 Device Tree nodes

Le 23/06/2016 22:48, Chen-Yu Tsai a ?crit :

quoted

diff --git a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
index 5ee43d8bf174..697582397dcf 100644
--- a/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts
+++ b/arch/arm/boot/dts/sun7i-a20-lamobo-r1.dts

@@ -110,13 +110,67 @@
 &gmac {
        pinctrl-names = "default";
        pinctrl-0 = <&gmac_pins_rgmii_a>;
-       phy = <&phy1>;
        phy-mode = "rgmii";
        phy-supply = <&reg_gmac_3v3>;
        status = "okay";

-       phy1: ethernet-phy at 1 {
-               reg = <1>;
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
+
+       mdio1 {

mdio will suffice.

There is another label in sun7i-a20.dtsi named mdio which is for the
MDIO controller node matching allwinner,sun4i-a10-mdio, which is not the
one we want here, we want the MDIO controller associated with the
Synopsys GMAC.

quoted

+               compatible = "snps,dwmac-mdio";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               switch: ethernet-switch at 30 {

30 decimal or 0x30 hex? We typically use hex values here.

30 decimal, will fix that.
-- 
Florian