[PATCH 07/12] power: pwrseq: rename file name for generic driver

On Mon, Jun 20, 2016 at 02:48:20PM +0200, Krzysztof Kozlowski wrote:

On 06/17/2016 12:09 PM, Peter Chen wrote:

quoted

The individual driver file name is better to contain module name.

Signed-off-by: Peter Chen <redacted>
---
 .../power/pwrseq/{pwrseq-simple.txt => mmc-pwrseq-simple.txt}         | 0
 drivers/power/pwrseq/Makefile                                         | 4 ++--
 drivers/power/pwrseq/{pwrseq.c => core.c}                             | 0
 drivers/power/pwrseq/{pwrseq_simple.c => pwrseq_mmc_simple.c}         | 0
 4 files changed, 2 insertions(+), 2 deletions(-)
 rename Documentation/devicetree/bindings/power/pwrseq/{pwrseq-simple.txt => mmc-pwrseq-simple.txt} (100%)
 rename drivers/power/pwrseq/{pwrseq.c => core.c} (100%)
 rename drivers/power/pwrseq/{pwrseq_simple.c => pwrseq_mmc_simple.c} (100%)

diff --git a/Documentation/devicetree/bindings/power/pwrseq/pwrseq-simple.txt b/Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-simple.txt
similarity index 100%
rename from Documentation/devicetree/bindings/power/pwrseq/pwrseq-simple.txt
rename to Documentation/devicetree/bindings/power/pwrseq/mmc-pwrseq-simple.txt
diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile
index 9e40e4b..d475e01 100644
--- a/drivers/power/pwrseq/Makefile
+++ b/drivers/power/pwrseq/Makefile

@@ -1,3 +1,3 @@
-obj-$(CONFIG_POWER_SEQ)		+= pwrseq.o
-obj-$(CONFIG_POWER_SEQ_SIMPLE)	+= pwrseq_simple.o
+obj-$(CONFIG_POWER_SEQ)		+= core.o
+obj-$(CONFIG_POWER_SEQ_SIMPLE)	+= pwrseq_mmc_simple.o

Although the driver was developed for MMC but it is quite generic (or
rather - mmc independent). The name of the driver is just
"pwrseq_simple" so I think MMC prefix is not needed.

It is may be common for MMC, but not USB, or others. Eg, its reset-gpios
is just like enable-gpios. Some reset chip process needs to toggle gpio.

-- 

Best Regards,
Peter Chen