[PATCH 3/3] ARM: dts: BCM5310x: Enable switch ports on SmartRG SR400AC
From: f.fainelli@gmail.com (Florian Fainelli)
Date: 2016-06-10 18:35:56
Also in:
linux-devicetree
Subsystem:
the rest · Maintainer:
Linus Torvalds
Possibly related (same subject, not in this thread)
- 2016-06-10 · Re: [PATCH 3/3] ARM: dts: BCM5310x: Enable switch ports on SmartRG SR400AC · Andrew Lunn <hidden>
Define the port mapping for the SmartRG SR400ACE device. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> --- arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 40 +++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
diff --git a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
index 8b0c440b2e71..c219d33496cc 100644
--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts
+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts@@ -126,3 +126,43 @@ &spi_nor { status = "okay"; }; + +&srab { + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + switch0port0: port at 0 { + reg = <0>; + label = "lan4"; + }; + + switch0port1: port at 1 { + reg = <1>; + label = "lan3"; + }; + + switch0port2: port at 2 { + reg = <2>; + label = "lan2"; + }; + + switch0port3: port at 3 { + reg = <3>; + label = "lan1"; + }; + + switch0port4: port at 4 { + reg = <4>; + label = "wan"; + }; + + switch0port5: port at 5 { + reg = <5>; + label = "cpu"; + ethernet = <&gmac0>; + }; + }; +};
--
2.7.4