[PATCH 1/3] arm64: dts: juno: add coresight support
From: liviu.dudau@arm.com (Liviu Dudau)
Date: 2016-06-08 16:04:49
Also in:
linux-devicetree
On Mon, Jun 06, 2016 at 04:59:23PM +0100, Sudeep Holla wrote:
Most of the debug-related components on Juno are located in the coreSight subsystem while others are located in the Cortex-Axx clusters, the SCP subsystem, and in the main system. Each core in the two processor clusters contain an Embedded Trace Macrocell(ETM) which generates real-time trace information that trace tools can use and an ATB trace output that is sent to a funnel before going to the CoreSight subsystem. The trace output signals combine with two trace expansions using another funnel and fed into the Embedded Trace FIFO(ETF0). The output trace data stream of the funnel is then replicated before it is sent to either the: - Trace Port Interface Unit(TPIU), that sends it out using the trace port. - ETR that can write the trace data to memory located in the application memory space Cc: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Liviu Dudau <Liviu.Dudau@arm.com>
quoted hunk
Cc: Lorenzo Pieralisi <redacted> Cc: linux-arm-kernel at lists.infradead.org Cc: devicetree at vger.kernel.org Signed-off-by: Sudeep Holla <redacted> --- arch/arm64/boot/dts/arm/juno-base.dtsi | 296 +++++++++++++++++++++++++++++++++ arch/arm64/boot/dts/arm/juno-r1.dts | 24 +++ arch/arm64/boot/dts/arm/juno-r2.dts | 24 +++ arch/arm64/boot/dts/arm/juno.dts | 24 +++ 4 files changed, 368 insertions(+)diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi index dee2386d3b9b..90a8710f7032 100644 --- a/arch/arm64/boot/dts/arm/juno-base.dtsi +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi@@ -56,6 +56,302 @@ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; }; + /* + * Juno TRMs specify the size for these coresight components as 64K. + * The actual size is just 4K though 64K is reserved. Access to the + * unmapped reserved region results in a DECERR response. + */ + etf at 20010000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20010000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* input port */ + port at 0 { + reg = <0>; + etf_in_port: endpoint { + slave-mode; + remote-endpoint = <&main_funnel_out_port>; + }; + }; + + /* output port */ + port at 1 { + reg = <0>; + etf_out_port: endpoint { + remote-endpoint = <&replicator_in_port0>; + }; + }; + }; + }; + + tpiu at 20030000 { + compatible = "arm,coresight-tpiu", "arm,primecell"; + reg = <0 0x20030000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + tpiu_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port0>; + }; + }; + }; + + main_funnel at 20040000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x20040000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + main_funnel_out_port: endpoint { + remote-endpoint = <&etf_in_port>; + }; + }; + + port at 1 { + reg = <0>; + main_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&cluster0_funnel_out_port>; + }; + }; + + port at 2 { + reg = <1>; + main_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&cluster1_funnel_out_port>; + }; + }; + + }; + }; + + etr at 20070000 { + compatible = "arm,coresight-tmc", "arm,primecell"; + reg = <0 0x20070000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + etr_in_port: endpoint { + slave-mode; + remote-endpoint = <&replicator_out_port1>; + }; + }; + }; + + coresight-replicator { + /* non-configurable replicators don't show up on the + * AMBA bus. As such no need to add "arm,primecell". + */ + compatible = "arm,coresight-replicator"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + /* replicator output ports */ + port at 0 { + reg = <0>; + replicator_out_port0: endpoint { + remote-endpoint = <&tpiu_in_port>; + }; + }; + + port at 1 { + reg = <1>; + replicator_out_port1: endpoint { + remote-endpoint = <&etr_in_port>; + }; + }; + + /* replicator input port */ + port at 2 { + reg = <0>; + replicator_in_port0: endpoint { + slave-mode; + remote-endpoint = <&etf_out_port>; + }; + }; + }; + }; + + cluster0_funnel at 220c0000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x220c0000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + cluster0_funnel_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port0>; + }; + }; + + port at 1 { + reg = <0>; + cluster0_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&cluster0_etm0_out_port>; + }; + }; + + port at 2 { + reg = <1>; + cluster0_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&cluster0_etm1_out_port>; + }; + }; + }; + }; + + cluster1_funnel at 230c0000 { + compatible = "arm,coresight-funnel", "arm,primecell"; + reg = <0 0x230c0000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + port at 0 { + reg = <0>; + cluster1_funnel_out_port: endpoint { + remote-endpoint = <&main_funnel_in_port1>; + }; + }; + + port at 1 { + reg = <0>; + cluster1_funnel_in_port0: endpoint { + slave-mode; + remote-endpoint = <&cluster1_etm0_out_port>; + }; + }; + + port at 2 { + reg = <1>; + cluster1_funnel_in_port1: endpoint { + slave-mode; + remote-endpoint = <&cluster1_etm1_out_port>; + }; + }; + port at 3 { + reg = <2>; + cluster1_funnel_in_port2: endpoint { + slave-mode; + remote-endpoint = <&cluster1_etm2_out_port>; + }; + }; + port at 4 { + reg = <3>; + cluster1_funnel_in_port3: endpoint { + slave-mode; + remote-endpoint = <&cluster1_etm3_out_port>; + }; + }; + }; + }; + + etm0: etm at 22040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x22040000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + cluster0_etm0_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port0>; + }; + }; + }; + + etm1: etm at 22140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x22140000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + cluster0_etm1_out_port: endpoint { + remote-endpoint = <&cluster0_funnel_in_port1>; + }; + }; + }; + + etm2: etm at 23040000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23040000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + cluster1_etm0_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port0>; + }; + }; + }; + + etm3: etm at 23140000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23140000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + cluster1_etm1_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port1>; + }; + }; + }; + + etm4: etm at 23240000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23240000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + cluster1_etm2_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port2>; + }; + }; + }; + + etm5: etm at 23340000 { + compatible = "arm,coresight-etm4x", "arm,primecell"; + reg = <0 0x23340000 0 0x1000>; + + clocks = <&soc_smc50mhz>; + clock-names = "apb_pclk"; + port { + cluster1_etm3_out_port: endpoint { + remote-endpoint = <&cluster1_funnel_in_port3>; + }; + }; + }; + sram: sram at 2e000000 { compatible = "arm,juno-sram-ns", "mmio-sram"; reg = <0x0 0x2e000000 0x0 0x8000>;diff --git a/arch/arm64/boot/dts/arm/juno-r1.dts b/arch/arm64/boot/dts/arm/juno-r1.dts index d95d9e7e2dc0..f4f8f54f8b85 100644 --- a/arch/arm64/boot/dts/arm/juno-r1.dts +++ b/arch/arm64/boot/dts/arm/juno-r1.dts@@ -181,3 +181,27 @@ &pcie_ctlr { status = "okay"; }; + +&etm0 { + cpu = <&A57_0>; +}; + +&etm1 { + cpu = <&A57_1>; +}; + +&etm2 { + cpu = <&A53_0>; +}; + +&etm3 { + cpu = <&A53_1>; +}; + +&etm4 { + cpu = <&A53_2>; +}; + +&etm5 { + cpu = <&A53_3>; +};diff --git a/arch/arm64/boot/dts/arm/juno-r2.dts b/arch/arm64/boot/dts/arm/juno-r2.dts index 88ecd6182b67..d903e545b64c 100644 --- a/arch/arm64/boot/dts/arm/juno-r2.dts +++ b/arch/arm64/boot/dts/arm/juno-r2.dts@@ -181,3 +181,27 @@ &pcie_ctlr { status = "okay"; }; + +&etm0 { + cpu = <&A72_0>; +}; + +&etm1 { + cpu = <&A72_1>; +}; + +&etm2 { + cpu = <&A53_0>; +}; + +&etm3 { + cpu = <&A53_1>; +}; + +&etm4 { + cpu = <&A53_2>; +}; + +&etm5 { + cpu = <&A53_3>; +};diff --git a/arch/arm64/boot/dts/arm/juno.dts b/arch/arm64/boot/dts/arm/juno.dts index dcfcf15a17f5..a7270eff6939 100644 --- a/arch/arm64/boot/dts/arm/juno.dts +++ b/arch/arm64/boot/dts/arm/juno.dts@@ -173,3 +173,27 @@ #include "juno-base.dtsi" }; + +&etm0 { + cpu = <&A57_0>; +}; + +&etm1 { + cpu = <&A57_1>; +}; + +&etm2 { + cpu = <&A53_0>; +}; + +&etm3 { + cpu = <&A53_1>; +}; + +&etm4 { + cpu = <&A53_2>; +}; + +&etm5 { + cpu = <&A53_3>; +}; --2.7.4
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
?\_(?)_/?