On 02/06/16 12:14, Rob Herring wrote:

On Sun, May 29, 2016 at 01:12:02PM +0200, Carlo Caione wrote:

quoted

From: Carlo Caione <redacted>

Add the binding documentation for the Amlogic secure monitor driver.

Signed-off-by: Carlo Caione <redacted>
---
 .../bindings/firmware/meson/meson_sm.txt           | 33 ++++++++++++++++++++++
 1 file changed, 33 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/meson/meson_sm.txt

diff --git a/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt
new file mode 100644
index 0000000..6f0b5bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/meson/meson_sm.txt

@@ -0,0 +1,33 @@
+* Amlogic Secure Monitor
+
+In the Amlogic SoCs the Secure Monitor code is used to provide access to the
+NVMEM, enable JTAG, set USB boot, etc...
+
+Required properties for the secure monitor node:
+- compatible: Should be "amlogic,meson-gxbb-sm"
+
+Example:
+
+	firmware {
+		compatible = "simple-bus";

Drop this. Sorry, but no abusing simple-bus to get automagic creation of 
your platform device.

Sounds reasonable. I can hook this up to some *_initcall. What about
introducing a new FIRMWARE_OF_DECLARE() ?

Cheers,

-- 
Carlo Caione