[PATCH v2 3/9] tty: serial: fsl_lpuart: support suspend/resume
From: Bhuvanchandra DV <hidden>
Date: 2016-06-28 07:07:25
Also in:
linux-clk, linux-serial, lkml
Subsystem:
the rest, tty layer and serial drivers · Maintainers:
Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
From: Stefan Agner <stefan@agner.ch> Add suspend/resume support. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Bhuvanchandra DV <redacted> --- drivers/tty/serial/fsl_lpuart.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index fabfa7e..75a2098 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c@@ -483,9 +483,8 @@ static void lpuart_dma_rx_complete(void *arg) spin_unlock_irqrestore(&sport->port.lock, flags); } -static void lpuart_timer_func(unsigned long data) +static void lpuart_dma_rx_terminate(struct lpuart_port *sport) { - struct lpuart_port *sport = (struct lpuart_port *)data; struct tty_port *port = &sport->port.state->port; struct dma_tx_state state; unsigned long flags;
@@ -510,6 +509,11 @@ static void lpuart_timer_func(unsigned long data) spin_unlock_irqrestore(&sport->port.lock, flags); } +static void lpuart_timer_func(unsigned long data) +{ + lpuart_dma_rx_terminate((struct lpuart_port *)data); +} + static inline void lpuart_prepare_rx(struct lpuart_port *sport) { unsigned long flags;
@@ -1925,7 +1929,12 @@ static int lpuart_suspend(struct device *dev) writeb(temp, sport->port.membase + UARTCR2); } + if (sport->dma_rx_in_progress) + lpuart_dma_rx_terminate(sport); + uart_suspend_port(&lpuart_reg, &sport->port); + if (sport->port.suspended && !sport->port.irq_wake) + clk_disable_unprepare(sport->clk); return 0; }
@@ -1935,6 +1944,9 @@ static int lpuart_resume(struct device *dev) struct lpuart_port *sport = dev_get_drvdata(dev); unsigned long temp; + if (sport->port.suspended && !sport->port.irq_wake) + clk_prepare_enable(sport->clk); + if (sport->lpuart32) { lpuart32_setup_watermark(sport); temp = lpuart32_read(sport->port.membase + UARTCTRL);
--
2.9.0