[PATCH v2 5/5] dmaengine: dma: Use different channel names for each dma
From: Kedareswara rao Appana <hidden>
Date: 2016-06-24 05:21:43
Also in:
linux-devicetree, lkml
Subsystem:
dma generic offload engine subsystem, open firmware and flattened device tree bindings, the rest · Maintainers:
Vinod Koul, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Current driver assumes that child node channel name is either "xlnx,axi-vdma-mm2s-channel" or "xlnx,axi-vdma-s2mm-channel" which is confusing the users of AXI DMA and CDMA. This patch fixes this issue by using different channel names for the AXI DMA and AXI CDMA child nodes. Signed-off-by: Kedareswara rao Appana <redacted> --- Chanes for v2: ---> New patch. .../devicetree/bindings/dma/xilinx/xilinx_dma.txt | 6 +++++- drivers/dma/xilinx/xilinx_dma.c | 8 ++++++-- 2 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index 0faa189..a2b8bfa 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt@@ -50,8 +50,12 @@ Optional properties for VDMA: {3}, flush s2mm channel Required child node properties: -- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or +- compatible: + For VDMA: It should be either "xlnx,axi-vdma-mm2s-channel" or "xlnx,axi-vdma-s2mm-channel". + For CDMA: It should be "xlnx,axi-cdma-channel". + For AXIDMA: It should be either "xlnx,axi-dma-mm2s-channel" or + "xlnx,axi-dma-s2mm-channel". - interrupts: Should contain per channel VDMA interrupts. - xlnx,datawidth: Should contain the stream data width, take values {32,64...1024}.
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 0768d9f..cf47347 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c@@ -2353,7 +2353,9 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev, if (!has_dre) xdev->common.copy_align = fls(width - 1); - if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel")) { + if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel") || + of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") || + of_device_is_compatible(node, "xlnx,axi-cdma-channel")) { chan->direction = DMA_MEM_TO_DEV; chan->id = chan_id; chan->tdest = chan_id;
@@ -2367,7 +2369,9 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev, chan->flush_on_fsync = true; } } else if (of_device_is_compatible(node, - "xlnx,axi-vdma-s2mm-channel")) { + "xlnx,axi-vdma-s2mm-channel") || + of_device_is_compatible(node, + "xlnx,axi-dma-s2mm-channel")) { chan->direction = DMA_DEV_TO_MEM; chan->id = chan_id; chan->tdest = chan_id - xdev->nr_channels;
--
1.7.1