[PATCH v2 04/13] pwm: rockchip: Avoid glitches on already running PWMs
From: Boris Brezillon <hidden>
Date: 2016-06-08 16:38:46
Also in:
linux-devicetree, linux-pwm, linux-rockchip, lkml
Subsystem:
arm/rockchip soc support, pwm subsystem, the rest · Maintainers:
Heiko Stuebner, Uwe Kleine-König, Linus Torvalds
The current logic will disable the PWM clk even if the PWM was left enabled by the bootloader (because it's controlling a critical device like a regulator for example). Keep the PWM clk enabled if the PWM is enabled to avoid any glitches. Signed-off-by: Boris Brezillon <redacted> Reviewed-by: Brian Norris <briannorris@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> --- drivers/pwm/pwm-rockchip.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index c72b419..dd8ca86 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c@@ -319,7 +319,7 @@ static int rockchip_pwm_probe(struct platform_device *pdev) if (IS_ERR(pc->clk)) return PTR_ERR(pc->clk); - ret = clk_prepare(pc->clk); + ret = clk_prepare_enable(pc->clk); if (ret) return ret;
@@ -342,6 +342,10 @@ static int rockchip_pwm_probe(struct platform_device *pdev) dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); } + /* Keep the PWM clk enabled if the PWM appears to be up and running. */ + if (!pwm_is_enabled(pc->chip.pwms)) + clk_disable(pc->clk); + return ret; }
@@ -349,6 +353,20 @@ static int rockchip_pwm_remove(struct platform_device *pdev) { struct rockchip_pwm_chip *pc = platform_get_drvdata(pdev); + /* + * Disable the PWM clk before unpreparing it if the PWM device is still + * running. This should only happen when the last PWM user left it + * enabled, or when nobody requested a PWM that was previously enabled + * by the bootloader. + * + * FIXME: Maybe the core should disable all PWM devices in + * pwmchip_remove(). In this case we'd only have to call + * clk_unprepare() after pwmchip_remove(). + * + */ + if (pwm_is_enabled(pc->chip.pwms)) + clk_disable(pc->clk); + clk_unprepare(pc->clk); return pwmchip_remove(&pc->chip);
--
2.7.4