[PATCH v2 2/2] dt-bindings: clocksource: Add Add Oxford Semiconductor RPS Timer bindings
From: Neil Armstrong <hidden>
Date: 2016-06-07 16:05:50
Also in:
linux-devicetree, lkml
Subsystem:
clocksource, clockevent drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Daniel Lezcano, Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Add DT bindings for the Oxford Semiconductor RPS dual Timer. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Neil Armstrong <redacted> --- .../devicetree/bindings/timer/oxsemi,rps-timer.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt
diff --git a/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt
new file mode 100644
index 0000000..3ca89cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/oxsemi,rps-timer.txt@@ -0,0 +1,17 @@ +Oxford Semiconductor OXNAS SoCs Family RPS Timer +================================================ + +Required properties: +- compatible: Should be "oxsemi,ox810se-rps-timer" +- reg : Specifies base physical address and size of the registers. +- interrupts : The interrupts of the two timers +- clocks : The phandle of the timer clock source + +example: + +timer0: timer at 200 { + compatible = "oxsemi,ox810se-rps-timer"; + reg = <0x200 0x40>; + clocks = <&rpsclk>; + interrupts = <4 5>; +};
--
1.9.1