[PATCH v3 RESEND 2/7] binding: Make "mdio-parent-bus" property from mandatory to optional
From: Pramod Kumar <hidden>
Date: 2016-06-03 16:03:34
Also in:
linux-devicetree, lkml, netdev
Subsystem:
ethernet phy library, networking drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Andrew Lunn, Heiner Kallweit, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Change "mdio-parent-bus" from mandatory section to optional as it won't be required by integrated MDIO multiplexer which has bus selection and mdio transaction generation logic, integrated inside. Signed-off-by: Pramod Kumar <redacted> --- Documentation/devicetree/bindings/net/mdio-mux.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/net/mdio-mux.txt b/Documentation/devicetree/bindings/net/mdio-mux.txt
index 491f5bd..f58571f 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux.txt
+++ b/Documentation/devicetree/bindings/net/mdio-mux.txt@@ -5,11 +5,12 @@ numbered uniquely in a device dependent manner. The nodes for an MDIO bus multiplexer/switch will have one child node for each child bus. Required properties: -- mdio-parent-bus : phandle to the parent MDIO bus. - #address-cells = <1>; - #size-cells = <0>; Optional properties: +- mdio-parent-bus : phandle to the parent MDIO bus. + - Other properties specific to the multiplexer/switch hardware. Required properties for child nodes:
--
1.9.1