[PATCH v2,1/5] dt-bindings: mt8173-xhci: support host side of dual-role mode

Hi,

On Tue, 2016-05-31 at 14:07 +0300, Sergei Shtylyov wrote:

Hello.

On 5/31/2016 8:52 AM, Chunfeng Yun wrote:

quoted

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
 .../devicetree/bindings/usb/mt8173-xhci.txt        |   48 ++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
index b3a7ffa..542e3fa 100644
--- a/Documentation/devicetree/bindings/usb/mt8173-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mt8173-xhci.txt

@@ -2,6 +2,14 @@ MT8173 xHCI

 The device node for Mediatek SOC USB3.0 host controller

[...]

quoted

 Required properties:
  - compatible : should contain "mediatek,mt8173-xhci"
  - reg : specifies physical base address and size of the registers,

@@ -27,6 +35,9 @@ Optional properties:
 	control register, it depends on "mediatek,wakeup-src".
  - vbus-supply : reference to the VBUS regulator;
  - usb3-lpm-capable : supports USB3.0 LPM
+ - pinctl-names : a pinctrl state named "default" must be defined

    pinctrl-names.

Thanks.

quoted

+ - pinctrl-0 : pin control group
+	See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt

 Example:
 usb30: usb at 11270000 {

[...]

MBR, Sergei