[PATCH] ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards
From: Krzysztof Kozlowski <hidden>
Date: 2016-06-01 08:50:37
Also in:
linux-devicetree, linux-samsung-soc, lkml
On 05/31/2016 11:48 PM, Javier Martinez Canillas wrote:
quoted hunk ↗ jump to hunk
The Exynos5800 Peach Pi and Exynos5420 Peach Pit Chromebooks have the LDO10 1.8V output connected to the VDD18_TS{01,23,4} Exynos SoC pins. Add this regulator as the input supply of the Thermal Management Unit channels and also remove the always-on property since all the devices using LDO10 as input supply are now defined. Signed-off-by: Javier Martinez Canillas <redacted> --- arch/arm/boot/dts/exynos5420-peach-pit.dts | 21 ++++++++++++++++++++- arch/arm/boot/dts/exynos5800-peach-pi.dts | 21 ++++++++++++++++++++- 2 files changed, 40 insertions(+), 2 deletions(-)diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index c1247402cb17..a55760b5fa82 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts@@ -425,7 +425,6 @@ regulator-name = "vdd_ldo10"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-state-mem { regulator-off-in-suspend; };@@ -924,6 +923,26 @@ assigned-clock-parents = <&clock CLK_FIN_PLL>; }; +&tmu_cpu0 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu1 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu2 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_cpu3 { + vtmu-supply = <&ldo10_reg>; +}; + +&tmu_gpu { + vtmu-supply = <&ldo10_reg>; +}; +
Here and for Peach Pi please put the nodes in alphabetical order. Best regards, Krzysztof