Thread (3 messages) 3 messages, 3 authors, 2016-06-10
STALE3690d

[PATCH 0108/1529] Fix typo

From: Ivaylo Dimitrov <hidden>
Date: 2016-05-21 12:00:38
Also in: linux-omap


On 21.05.2016 14:50, Andrea Gelmini wrote:
quoted hunk ↗ jump to hunk
Signed-off-by: Andrea Gelmini <redacted>
---
  arch/arm/mach-omap2/sdrc.h | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 645a2a4..f115006 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
   * don't adjust it down as your clock period increases the refresh interval
   * will not be met. Setting all parameters for complete worst case may work,
   * but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration.	A dynamic call is
- * need for that as no single right value exists acorss production samples.
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists across production samples.
needed?
   *
   * Only the FULL speed values are given. Current code is such that rate
   * changes must be made at DPLLoutx2. The actual value adjustment for low
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help