[PATCH 2/8] ARM: dts: am33xx: Move to operating-points-v2 table and ti-cpufreq driver
From: viresh.kumar@linaro.org (Viresh Kumar)
Date: 2016-05-19 04:41:21
Also in:
linux-devicetree, linux-omap, linux-pm
On 18-05-16, 18:36, Dave Gerlach wrote:
+ cpu0_opp_table: opp_table0 {
+ compatible = "operating-points-v2";
+
+ /*
+ * The three following nodes are marked with opp-suspend
+ * because the can not be enabled simultaneously on a
+ * single SoC.
+ */
+ opp50 at 300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <950000 931000 969000>;
+ opp-supported-hw = <0x06 0x0010>;Is there any place in either of the patchsets you have sent, that details the usage of the above two values? I mean which defines, what is 0x6 and what is 0x1 ? -- viresh