[PATCH 1/4] dt: bindings: add thermal device driver for bcm2835
From: Eric Anholt <hidden>
Date: 2016-05-12 23:03:23
Also in:
linux-devicetree, linux-pm
kernel at martin.sperl.org writes:
quoted hunk
From: Martin Sperl <redacted> Add documentation for bcm2835 SOC thermal sensor. Signed-off-by: Martin Sperl <redacted> --- .../devicetree/bindings/thermal/bcm2835-thermal.txt | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/bcm2835-thermal.txtdiff --git a/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt new file mode 100644 index 0000000..607519a --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/bcm2835-thermal.txt
There's a naming convention for the BCM DT bindings these days where you basically name it after the compatible string, so this file should be moved to "brcm,bcm2835-thermal.txt" (yes, even though it's inconsistent with the rest of the files in the directory).
quoted hunk
@@ -0,0 +1,16 @@ +Binding for Thermal Sensor driver for BCM2835 SoCs. + +Required parameters: +------------------- + +compatible : should be: "brcm,bcm2835-thermal"
Optional: change to 'should be: "brcm,bcm2835-thermal" or "brcm,bcm2837-thermal"' (see next review for explanation). I would also drop the space before the colons on the parameters, but as long as the filename is changed this patch is: Acked-by: Eric Anholt <redacted>
+reg : Address range of the thermal registers.
+clocks : Phandle of the clock used by the thermal sensor.
+
+Example:
+
+thermal: thermal at 0x7e212000 {
+ compatible = "brcm,bcm2835-thermal";
+ reg = <0x7e212000 0x8>;
+ clocks = <&clocks BCM2835_CLOCK_TSENS>;
+};
--
2.1.4-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 818 bytes Desc: not available URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160512/f512b792/attachment.sig>