[PATCH 1/2 (linux-stable-4.5.y)] Revert "stmmac: Fix 'eth0: No PHY found' regression"
From: Giuseppe Cavallaro <hidden>
Date: 2016-05-23 13:26:12
Also in:
netdev, stable
Subsystem:
networking drivers, stmmac ethernet driver, the rest · Maintainers:
Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Maxime Chevallier, Linus Torvalds
From: Giuseppe CAVALLARO <redacted> This reverts commit 88f8b1bb41c6208f81b6a480244533ded7b59493. due to problems on GeekBox and Banana Pi M1 board when connected to a real transceiver instead of a switch via fixed-link. Signed-off-by: Giuseppe Cavallaro <redacted> Cc: Gabriel Fernandez <redacted> Cc: Andreas F?rber <afaerber@suse.de> Cc: Frank Sch?fer <redacted> Cc: Dinh Nguyen <redacted> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net> --- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 11 ++++++++++- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 +-------- 2 files changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
index efb54f3..0faf163 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c@@ -199,12 +199,21 @@ int stmmac_mdio_register(struct net_device *ndev) struct stmmac_priv *priv = netdev_priv(ndev); struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data; int addr, found; - struct device_node *mdio_node = priv->plat->mdio_node; + struct device_node *mdio_node = NULL; + struct device_node *child_node = NULL; if (!mdio_bus_data) return 0; if (IS_ENABLED(CONFIG_OF)) { + for_each_child_of_node(priv->device->of_node, child_node) { + if (of_device_is_compatible(child_node, + "snps,dwmac-mdio")) { + mdio_node = child_node; + break; + } + } + if (mdio_node) { netdev_dbg(ndev, "FOUND MDIO subnode\n"); } else {
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 4514ba7..6a52fa1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c@@ -110,7 +110,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) struct device_node *np = pdev->dev.of_node; struct plat_stmmacenet_data *plat; struct stmmac_dma_cfg *dma_cfg; - struct device_node *child_node = NULL; plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); if (!plat)
@@ -141,19 +140,13 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) plat->phy_node = of_node_get(np); } - for_each_child_of_node(np, child_node) - if (of_device_is_compatible(child_node, "snps,dwmac-mdio")) { - plat->mdio_node = child_node; - break; - } - /* "snps,phy-addr" is not a standard property. Mark it as deprecated * and warn of its use. Remove this when phy node support is added. */ if (of_property_read_u32(np, "snps,phy-addr", &plat->phy_addr) == 0) dev_warn(&pdev->dev, "snps,phy-addr property is deprecated\n"); - if ((plat->phy_node && !of_phy_is_fixed_link(np)) || !plat->mdio_node) + if ((plat->phy_node && !of_phy_is_fixed_link(np)) || plat->phy_bus_name) plat->mdio_bus_data = NULL; else plat->mdio_bus_data =
--
2.7.4