[PATCH 5/5] arm/dts/imx6q-b850v3: Use GE B850v3 LVDS/DP++ Bridge
STALE3658d
From: Peter Senna Tschudin <hidden>
Date: 2016-05-30 16:41:42
Also in:
dri-devel, linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v1 of 3 in this series.
Revisions (3)
- v1 current
- v2 [diff vs current]
- v3 [diff vs current]
Configure the GE B850v3 to use the LVDS/DP++ bridge. Signed-off-by: Peter Senna Tschudin <redacted> --- arch/arm/boot/dts/imx6q-b850v3.dts | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-b850v3.dts b/arch/arm/boot/dts/imx6q-b850v3.dts
index 88a70de..d366384 100644
--- a/arch/arm/boot/dts/imx6q-b850v3.dts
+++ b/arch/arm/boot/dts/imx6q-b850v3.dts@@ -77,6 +77,13 @@ fsl,data-mapping = "spwg"; fsl,data-width = <24>; status = "okay"; + + port at 4 { + reg = <4>; + lvds0_out: endpoint { + remote-endpoint = <&b850v3_lvds_dp_bridge_in>; + }; + }; }; };
@@ -147,3 +154,27 @@ reg = <0x4a>; }; }; + +&mux2_i2c2 { + status = "okay"; + clock-frequency = <100000>; + + b850v3_lvds_dp_bridge { + compatible = "ge,b850v3_lvds_dp"; + #address-cells = <1>; + #size-cells = <0>; + + reg = <0x73>; + interrupt-parent = <&gpio2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>; + + edid-reg = <0x72>; + + port at 0 { + reg = <0>; + b850v3_lvds_dp_bridge_in: endpoint { + remote-endpoint = <&lvds0_out>; + }; + }; + }; +};
--
2.5.5