On Wednesday, May 25, 2016 12:34:19 PM CEST Rob Herring wrote:

On Tue, May 24, 2016 at 11:47:31AM +0000, Nava kishore Manne wrote:

quoted

quoted

-----Original Message-----
From: Arnd Bergmann [mailto:arnd at arndb.de]
Sent: Tuesday, May 24, 2016 2:21 PM
To: Nava kishore Manne <redacted>
Cc: robh+dt at kernel.org; pawel.moll at arm.com; mark.rutland at arm.com;
ijc+devicetree at hellion.org.uk; galak at codeaurora.org; Michal Simek
[off-list ref]; Soren Brinkmann [off-list ref];
balbi at ti.com; gregkh at linuxfoundation.org; Hyun Kwon
[off-list ref]; Nava kishore Manne [off-list ref]; Radhey
Shyam Pandey [off-list ref]; devicetree at vger.kernel.org; linux-
arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org
Subject: Re: [PATCH v3] Axi-usb: Add support for 64-bit addressing.

On Tuesday, May 24, 2016 10:51:08 AM CEST Nava kishore Manne wrote:

quoted

diff --git a/Documentation/devicetree/bindings/usb/udc-xilinx.txt

b/Documentation/devicetree/bindings/usb/udc-xilinx.txt
index 47b4e39..09df757 100644

--- a/Documentation/devicetree/bindings/usb/udc-xilinx.txt
+++ b/Documentation/devicetree/bindings/usb/udc-xilinx.txt

@@ -1,18 +1,23 @@
 Xilinx USB2 device controller

 Required properties:
-- compatible             : Should be "xlnx,usb2-device-4.00.a"
+- compatible             : Should be "xlnx,usb2-device-4.00.a" or
+                   "xlnx,usb2-device-5.00"
 - reg                    : Physical base address and size of the USB2
                    device registers map.
 - interrupts             : Should contain single irq line of USB2 device
                    controller
 - xlnx,has-builtin-dma   : if DMA is included
+- dma-ranges             : Should be as the following
+                   <child-bus-address, parent-bus-address, length>

A USB host should not have any children that are DMA capable, I think, so
this property doesn't make sense here. It should be part of the parent bus.

Will send next version (v4) by removing this property from the DT.

quoted

quoted

+- xlnx,addrwidth : Should be the dma addressing size in bits(ex: 64

bits)

I'm still unconvinced about the property definition here. What are the
possible options for the IP block? I don't think I ever saw a reply from you to
my earlier questions.

Sorry Let me clearly explain

From the IP version 5.0 onwards The IP support both 32-bit and 64-bit addressing.
But the older version of the IP's supports only 32-bit addressing.

This addrwidth property differentiates the address width for the new IP (I mean 5.0 version on wards)
For older IP it will be always 32-bit.

Then I think you should have a simple boolean property for 64-bit 
configuration.

I think matching on the version number is slightly better, as we have the version
already and it identifies whether the register exists.

Having a boolean property of course works as well, it just duplicates that
information.

	Arnd