[PATCH v2 3/4] ARM64: dts: amlogic: Enable Reset Controller on GXBB-based platforms
From: Neil Armstrong <hidden>
Date: 2016-05-25 09:52:55
Also in:
linux-amlogic, linux-devicetree, lkml
Subsystem:
arm/amlogic meson soc support, the rest · Maintainers:
Neil Armstrong, Kevin Hilman, Linus Torvalds
Update DTSI file to add the reset controller node. Signed-off-by: Neil Armstrong <redacted> --- arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
index 832815d..45e9c55 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi@@ -43,6 +43,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> / { compatible = "amlogic,meson-gxbb";
@@ -129,6 +130,12 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>; + reset: reset-controller at 4404 { + compatible = "amlogic,meson-gxbb-reset"; + reg = <0x0 0x04404 0x0 0x20>; + #reset-cells = <1>; + }; + uart_A: serial at 84c0 { compatible = "amlogic,meson-uart"; reg = <0x0 0x084c0 0x0 0x14>;
--
2.7.0