[PATCH 2/2] clk: rockchip: fix the rk3399 sdmmc sample shift
From: briannorris@chromium.org (Brian Norris)
Date: 2016-05-12 23:10:28
Also in:
linux-clk, linux-rockchip, lkml
On Thu, May 12, 2016 at 11:03:17AM -0700, Doug Anderson wrote:
Just like every other Rockhip device, the MMC "_sample" clocks should have a shift of 0, not a shift of 1. The rk3399 TRM agrees. Presumably these values were set to 0 because of a typo.
I'll semi-disagree about the TRM: the TRM doesn't seem to agree with
itself, so it sometimes agrees with you and sometimes doesn't :)
On page 79 of the 2nd (?) book, it looks like {SDMMC,SDIO}_CON{0,}[2:1]
are {drv,sample}_degree. But on page 208 of the 1st book, those are put
at bits [1:0].
Perhaps we can get a straight answer from Rockchip though.
Brian
quoted hunk ↗ jump to hunk
Things _sorta_ would have worked with the incorrect sample phase shift because of the register layout but wouldn't have been ideal and we would have skipped lots of phases. Also: we would never actually enabled the fine delay unless we happened to have 128 or more delay elements. This is expected behavior before this patch: * Try to set: 0 degrees + 1 delay elements Actually get: 0 degrees + 0 delay elements * Try to set: 90 degrees + 0 delay elements Actually get: 180 degrees + 0 delay elements * Try to set: 180 degrees + 0 delay elements Actually get: 0 degrees + 0 delay elements * Try to set: 270 degrees + 0 delay elements Actually get: 180 degrees + 0 delay elements * Try to set: 0 degrees + 129 delay elements Actually get: 0 degrees + 2 delay elements * Try to set: 180 degrees + 129 delay elements Actually get: 0 degrees + 3 delay elements * Try to set: 0 degrees + 130 delay elements Actually get: 0 degrees + 4 delay elements I verified that old code had a problem by turning on debug printouts and seeing that the old code would report this for one SD card I had: Good phase range 347-101 (115 len) Good phase range 202-326 (125 len) After my fix, it went down to one big good range for the same card. This is more expected: Good phase range 189-1 (173 len) Good phase range 82-85 (4 len) Good phase range 166-168 (3 len) Signed-off-by: Douglas Anderson <dianders@chromium.org> --- drivers/clk/rockchip/clk-rk3399.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index 291543f52caa..14ff3e109e1e 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c@@ -895,10 +895,10 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { RK3399_CLKGATE_CON(6), 1, GFLAGS), MMC(SCLK_SDMMC_DRV, "sdmmc_drv", "clk_sdmmc", RK3399_SDMMC_CON0, 1), - MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "clk_sdmmc", RK3399_SDMMC_CON1, 1), + MMC(SCLK_SDMMC_SAMPLE, "sdmmc_sample", "clk_sdmmc", RK3399_SDMMC_CON1, 0), MMC(SCLK_SDIO_DRV, "sdio_drv", "clk_sdio", RK3399_SDIO_CON0, 1), - MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "clk_sdio", RK3399_SDIO_CON1, 1), + MMC(SCLK_SDIO_SAMPLE, "sdio_sample", "clk_sdio", RK3399_SDIO_CON1, 0), /* pcie */ COMPOSITE(SCLK_PCIE_PM, "clk_pcie_pm", mux_pll_src_cpll_gpll_npll_24m_p, 0,