[PATCH 6/6] pinctrl: mt8173: set GPIO16 to usb iddig mode

On Wed, 2016-05-11 at 13:56 +0200, Linus Walleij wrote:

On Tue, May 10, 2016 at 10:23 AM, Chunfeng Yun
[off-list ref] wrote:

quoted

the default mode of GPIO16 pin is gpio, when set EINT16 to
IRQ_TYPE_LEVEL_HIGH, no interrupt is triggered, it can be
fixed when set its default mode as usb iddig.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>

Chunfeng, GPIO16 can be used as EINT16 mode, but the pinmux should be 0.
If you want to set its default mode to iddig, you should set it in dts.

Yours,
Hongzhou