Hi Thierry,

  Can you please provide review comments for this patch set.

Thanks
Dhananjay

On Tue, Mar 29, 2016 at 7:52 PM, Yendapally Reddy Dhananjaya Reddy
[off-list ref] wrote:

This patchset contains the pwm support for the Broadcom's iProc SoC's.

The first patch provides the documentation details and the
second patch contains the controller support details. The third patch
contains the enable method for Northstar Plus SoC.

This patch series has been tested on NSP bcm958625HR board with oscilloscope.
The pwm is not enabled for this board as the pins are open and not used.

This patch series is based on v4.6.0-rc1 and is available from github
repo: https://github.com/Broadcom/cygnus-linux.git
branch: iproc-pwm-v1

This patch series was originally sent on 03/01/16.
See https://lkml.org/lkml/2016/3/1/487

Yendapally Reddy Dhananjaya Reddy (3):
  Documentation: dt: Add Broadcom iproc pwm controller binding
  pwm: kona: Add support for Broadcom iproc pwm controller
  ARM: dts: NSP: Add PWM Support to DT

 .../devicetree/bindings/pwm/brcm,kona-pwm.txt      |   2 +-
 arch/arm/boot/dts/bcm-nsp.dtsi                     |   8 +
 drivers/pwm/Kconfig                                |   6 +-
 drivers/pwm/pwm-bcm-kona.c                         | 183 ++++++++++++++++++---
 4 files changed, 172 insertions(+), 27 deletions(-)

--
2.1.0