[PATCH 2/2] clk: bcm2835: Skip PLLC clocks when deciding on a new clock parent

Martin Sperl [off-list ref] writes:

quoted

On 26.04.2016, at 21:39, Eric Anholt [off-list ref] wrote:

If the firmware had set up a clock to source from PLLC, go along with
it.  But if we're looking for a new parent, we don't want to switch it
to PLLC because the firmware will force PLLC (and thus the AXI bus
clock) to different frequencies during over-temp/under-voltage,
without notification to Linux.

On my system, this moves the Linux-enabled HDMI state machine and DSI1
escape clock over to plld_per from pllc_per.  EMMC still ends up on
pllc_per, because the firmware had set it up to use that.

Signed-off-by: Eric Anholt <redacted>
Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks")
?

I guess this patch looks to me as if it is a policy inside the kernel,
which is AFAIK frowned upon.

Can you come up with a use for putting peripherals on PLLC ever, such
that we need choice?
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 818 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20160502/32cf10a4/attachment.sig>