[PATCH v2 2/9] ARM: dts: imx7d: add flexcan support
From: shawnguo@kernel.org (Shawn Guo)
Date: 2016-04-02 01:31:18
Also in:
linux-devicetree
On Tue, Mar 15, 2016 at 03:04:21PM +0100, Gary Bisson wrote:
quoted hunk
Add the device nodes for the i.MX7 FlexCAN buses. Signed-off-by: Gary Bisson <redacted> --- Changelog v1 -> v2: - none --- arch/arm/boot/dts/imx7d.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)diff --git a/arch/arm/boot/dts/imx7d.dtsi b/arch/arm/boot/dts/imx7d.dtsi index a768716..c5e47a4 100644 --- a/arch/arm/boot/dts/imx7d.dtsi +++ b/arch/arm/boot/dts/imx7d.dtsi@@ -930,6 +930,28 @@ fsl,num-rx-queues=<3>; status = "disabled"; }; + + flexcan1: can at 30a00000 { + compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan"; + reg = <0x30a00000 0x10000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX7D_CLK_DUMMY>, + <&clks IMX7D_CAN1_ROOT_CLK>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 1 0x10 17>;
Is this property documented anywhere, or even supported by mainline kernel? Shawn
+ status = "disabled";
+ };
+
+ flexcan2: can at 30a10000 {
+ compatible = "fsl,imx7d-flexcan", "fsl,imx6q-flexcan";
+ reg = <0x30a10000 0x10000>;
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks IMX7D_CLK_DUMMY>,
+ <&clks IMX7D_CAN2_ROOT_CLK>;
+ clock-names = "ipg", "per";
+ stop-mode = <&gpr 0x10 2 0x10 18>;
+ status = "disabled";
+ };
};
};
};
--
2.7.0