Thread (14 messages) 14 messages, 4 authors, 2016-04-26

[PATCH net v2 3/3] drivers: net: cpsw: use of_phy_connect() in fixed-link case

From: grygorii.strashko@ti.com (Grygorii Strashko)
Date: 2016-04-22 13:34:42
Also in: linux-devicetree, linux-omap, lkml, netdev

On 04/21/2016 09:41 PM, David Rivshin (Allworx) wrote:
From: David Rivshin <redacted>

If a fixed-link DT subnode is used, the phy_device was looked up so
that a PHY ID string could be constructed and passed to phy_connect().
This is not necessary, as the device_node can be passed directly to
of_phy_connect() instead. This reuses the same codepath as if the
phy-handle DT property was used.

Signed-off-by: David Rivshin <redacted>
Tested-by: Nicolas Chauvet <redacted>
---

Changes since v1 [1]:
- Rebased (trivial conflict, e5a03bfd modified the deleted snprintf)
- Added Tested-by from Nicolas Chauvet

[1] https://patchwork.ozlabs.org/patch/560327/
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
quoted hunk ↗ jump to hunk
  drivers/net/ethernet/ti/cpsw.c | 11 +----------
  1 file changed, 1 insertion(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 3c81413..245f919 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2038,30 +2038,21 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
  							"phy-handle", 0);
  		parp = of_get_property(slave_node, "phy_id", &lenp);
  		if (slave_data->phy_node) {
  			dev_dbg(&pdev->dev,
  				"slave[%d] using phy-handle=\"%s\"\n",
  				i, slave_data->phy_node->full_name);
  		} else if (of_phy_is_fixed_link(slave_node)) {
-			struct device_node *phy_node;
-			struct phy_device *phy_dev;
-
  			/* In the case of a fixed PHY, the DT node associated
  			 * to the PHY is the Ethernet MAC DT node.
  			 */
  			ret = of_phy_register_fixed_link(slave_node);
  			if (ret)
  				return ret;
-			phy_node = of_node_get(slave_node);
-			phy_dev = of_phy_find_device(phy_node);
-			if (!phy_dev)
-				return -ENODEV;
-			snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
-				 PHY_ID_FMT, phy_dev->mdio.bus->id,
-				 phy_dev->mdio.addr);
+			slave_data->phy_node = of_node_get(slave_node);
  		} else if (parp) {
  			u32 phyid;
  			struct device_node *mdio_node;
  			struct platform_device *mdio;

  			if (lenp != (sizeof(__be32) * 2)) {
  				dev_err(&pdev->dev, "Invalid slave[%d] phy_id property\n", i);

-- 
regards,
-grygorii
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help