[PATCH v2] PCI: designware: move remaining rc setup code to dw_pcie_setup_rc()
From: helgaas@kernel.org (Bjorn Helgaas)
Date: 2016-04-05 23:12:28
Also in:
linux-pci, lkml
On Wed, Mar 16, 2016 at 07:40:33PM +0800, Jisheng Zhang wrote:
dw_pcie_setup_rc(), as its name indicates, setups the RC. But current dw_pcie_host_init() also contains some necessary rc setup code. Another reason: the host may lost power during suspend to ram, the RC need to be re-setup after resume. The rc can't be correctly resumed without the rc setup code in dw_pcie_host_init(). So this patch moves the code to dw_pcie_setup_rc() to address the above two issues. After this patch, each pcie designware driver users could call dw_pcie_setup_rc() to re-setup rc when resume back. Signed-off-by: Jisheng Zhang <redacted>
Very nice, applied with Pratyush's ack to pci/host-designware for v4.7, thanks!
quoted hunk ↗ jump to hunk
--- Since v1: - fix gcc warning found by lkp, thanks drivers/pci/host/pcie-designware.c | 39 +++++++++++++++++++------------------- 1 file changed, 19 insertions(+), 20 deletions(-)diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index a4cccd3..261e4a11 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c@@ -434,7 +434,6 @@ int dw_pcie_host_init(struct pcie_port *pp) struct platform_device *pdev = to_platform_device(pp->dev); struct pci_bus *bus, *child; struct resource *cfg_res; - u32 val; int i, ret; LIST_HEAD(res); struct resource_entry *win;@@ -544,25 +543,6 @@ int dw_pcie_host_init(struct pcie_port *pp) if (pp->ops->host_init) pp->ops->host_init(pp); - /* - * If the platform provides ->rd_other_conf, it means the platform - * uses its own address translation component rather than ATU, so - * we should not program the ATU here. - */ - if (!pp->ops->rd_other_conf) - dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1, - PCIE_ATU_TYPE_MEM, pp->mem_base, - pp->mem_bus_addr, pp->mem_size); - - dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); - - /* program correct class for RC */ - dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); - - dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val); - val |= PORT_LOGIC_SPEED_CHANGE; - dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); - pp->root_bus_nr = pp->busn->start; if (IS_ENABLED(CONFIG_PCI_MSI)) { bus = pci_scan_root_bus_msi(pp->dev, pp->root_bus_nr,@@ -800,6 +780,25 @@ void dw_pcie_setup_rc(struct pcie_port *pp) val |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR; dw_pcie_writel_rc(pp, val, PCI_COMMAND); + + /* + * If the platform provides ->rd_other_conf, it means the platform + * uses its own address translation component rather than ATU, so + * we should not program the ATU here. + */ + if (!pp->ops->rd_other_conf) + dw_pcie_prog_outbound_atu(pp, PCIE_ATU_REGION_INDEX1, + PCIE_ATU_TYPE_MEM, pp->mem_base, + pp->mem_bus_addr, pp->mem_size); + + dw_pcie_wr_own_conf(pp, PCI_BASE_ADDRESS_0, 4, 0); + + /* program correct class for RC */ + dw_pcie_wr_own_conf(pp, PCI_CLASS_DEVICE, 2, PCI_CLASS_BRIDGE_PCI); + + dw_pcie_rd_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, &val); + val |= PORT_LOGIC_SPEED_CHANGE; + dw_pcie_wr_own_conf(pp, PCIE_LINK_WIDTH_SPEED_CONTROL, 4, val); } MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");-- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html