[PATCH v2] gpio/ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes
From: Gang Liu <hidden>
Date: 2016-03-31 03:36:58
Also in:
linux-gpio
Subsystem:
arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Linus Torvalds
Hi, Linus Walleij, Do you have some comments about this set of patches? Could you please help to ACK and apply those? Thanks a lot! Liu Gang -----Original Message----- From: Liu Gang [mailto:Gang.Liu at nxp.com] Sent: Wednesday, March 23, 2016 5:47 PM To: linus.walleij at linaro.org; linux-gpio at vger.kernel.org; linux-arm-kernel at lists.infradead.org; khilman at linaro.org Cc: robh+dt at kernel.org; Scott Wood <redacted>; Yang-Leo Li <redacted>; Mingkai Hu <mingkai.hu@nxp.com>; Gang Liu <redacted> Subject: [PATCH v2] gpio/ls1043a: Add compatible "fsl,qoriq-gpio" for ls1043a gpio nodes The compatible "fsl,qoriq-gpio" is used by gpio driver: drivers/gpio/gpio-mpc8xxx.c to implement general gpio functionalities. The chip-specific compatible "fsl,ls1043a-gpio" may be used to fix potential gpio IP block errata or other chip-specific gpio issues. Signed-off-by: Liu Gang <redacted> --- v2 changes: Add chip-specific compatible based on Scott's comment. arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index be72bf5..bf70b27 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi@@ -284,7 +284,7 @@ }; gpio1: gpio at 2300000 { - compatible = "fsl,ls1043a-gpio"; + compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2300000 0x0 0x10000>; interrupts = <0 66 0x4>; gpio-controller;
@@ -294,7 +294,7 @@ }; gpio2: gpio at 2310000 { - compatible = "fsl,ls1043a-gpio"; + compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2310000 0x0 0x10000>; interrupts = <0 67 0x4>; gpio-controller;
@@ -304,7 +304,7 @@ }; gpio3: gpio at 2320000 { - compatible = "fsl,ls1043a-gpio"; + compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2320000 0x0 0x10000>; interrupts = <0 68 0x4>; gpio-controller;
@@ -314,7 +314,7 @@ }; gpio4: gpio at 2330000 { - compatible = "fsl,ls1043a-gpio"; + compatible = "fsl,ls1043a-gpio", "fsl,qoriq-gpio"; reg = <0x0 0x2330000 0x0 0x10000>; interrupts = <0 134 0x4>; gpio-controller; --
2.1.0.27.g96db324