[PATCH v7 18/20] ARM: dts: Add support of bus frequency using VDD_INT for exynos3250-rinato
From: cw00.choi@samsung.com (Chanwoo Choi)
Date: 2016-03-31 09:09:18
Also in:
linux-devicetree, linux-pm, linux-samsung-soc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This patch adds the bus device-tree nodes of INT (internal) block to enable the bus frequency scaling. The following sub-blocks share the VDD_INT power source: - LEFTBUS (parent device) - RIGHTBUS - PERIL - LCD0 - FSYS - MCUISP / ISP - MFC The LEFTBUS is parent device with devfreq ondemand governor and the rest of devices depend on the LEFTBUS device. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <redacted> --- arch/arm/boot/dts/exynos3250-rinato.dts | 41 +++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 9710e79e10a0..09444897b416 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts@@ -154,6 +154,47 @@ status = "okay"; }; +&bus_leftbus { + devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>; + vdd-supply = <&buck3_reg>; + status = "okay"; +}; + +&bus_rightbus { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_lcd0 { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_fsys { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_mcuisp { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_isp { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_peril { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + +&bus_mfc { + devfreq = <&bus_leftbus>; + status = "okay"; +}; + &cpu0 { cpu0-supply = <&buck2_reg>; };
--
1.9.1