[PATCH v4 6/9] ARM: dts: Add initial gpio setting of MMC2 device for exynos3250-monk
From: cw00.choi@samsung.com (Chanwoo Choi)
Date: 2016-03-31 02:48:23
Also in:
linux-devicetree, linux-samsung-soc, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This patch adds initial pin configuration of MMC2 device on exynos3250-monk board because the MMC2 gpio pin (gpk2[0-6]) are NC (not connected) state. Suggested-by: Krzysztof Kozlowski <redacted> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Krzysztof Kozlowski <redacted> --- arch/arm/boot/dts/exynos3250-monk.dts | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 9e2840b59ae8..267f81adb42f 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts@@ -558,7 +558,17 @@ &pinctrl_1 { pinctrl-names = "default"; - pinctrl-0 = <&sleep1>; + pinctrl-0 = <&initial1 &sleep1>; + + initial1: initial-state { + PIN_IN(gpk2-0, DOWN, LV1); + PIN_IN(gpk2-1, DOWN, LV1); + PIN_IN(gpk2-2, DOWN, LV1); + PIN_IN(gpk2-3, DOWN, LV1); + PIN_IN(gpk2-4, DOWN, LV1); + PIN_IN(gpk2-5, DOWN, LV1); + PIN_IN(gpk2-6, DOWN, LV1); + }; sleep1: sleep-state { PIN_SLP(gpe0-0, PREV, NONE);
--
1.9.1