[PATCH v3 01/16] dt: davinci: use proper address after @

On Fri, Mar 25, 2016 at 8:29 AM, Sergei Shtylyov
[off-list ref] wrote:

Hello.

On 03/25/2016 02:51 AM, David Lechner wrote:

quoted

TI has been using the physical address in DT after the @ in device nodes.
The device tree convention is to use the same address that is used for
the reg property. This updates all davinci DT files to use the proper
convention.

Signed-off-by: David Lechner <david@lechnology.com>

[...]

quoted

diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 226cda7..4294849 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi

@@ -15,7 +15,7 @@
                #address-cells = <1>;
                #size-cells = <1>;
                ranges;
-               intc: interrupt-controller {
+               intc: interrupt-controller at fffee000 {
                        compatible = "ti,cp-intc";
                        interrupt-controller;
                        #interrupt-cells = <1>;

@@ -23,7 +23,7 @@
                        reg = <0xfffee000 0x2000>;
                };
        };
-       soc {
+       soc at 1c00000 {

   This node doesn't have the "reg" prop.

But probably has a ranges property which is correct.

Rob