[v6, 1/5] ARM64: dts: ls2080a: add device configuration node
From: yangbo.lu@nxp.com (Yangbo Lu)
Date: 2016-03-09 10:50:56
Also in:
linux-clk, linux-devicetree, linux-i2c, linux-iommu, linux-mmc, linuxppc-dev, lkml, netdev
Subsystem:
arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Linus Torvalds
Add the dts node for device configuration unit that provides general purpose configuration and status for the device. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> --- Changes for v2: - None Changes for v3: - None Changes for v4: - None Changes for v5: - Added this patch Changes for v6: - None --- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 2b23d03..6ad4710 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi@@ -191,6 +191,12 @@ clocks = <&sysclk>; }; + dcfg: dcfg at 1e00000 { + compatible = "fsl,ls2080a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + serial0: serial at 21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x0 0x21c0500 0x0 0x100>;
--
2.1.0.27.g96db324