[PATCH v6 2/2] dts/ls2080a: update the DTS for QSPI and DSPI support
From: Yuan Yao <hidden>
Date: 2016-03-09 10:31:36
Also in:
linux-devicetree, lkml
Subsystem:
arm/freescale layerscape arm architecture, the rest · Maintainers:
Frank Li, Linus Torvalds
Signed-off-by: Yuan Yao <redacted> Acked-by: Han xu <han.xu@nxp.com> --- Changed in v6: No changes. Changed in v5: Resend base on arm-soc. Changed in v4: No changes. Changed in v3: No changes. Changed in v2: Update my email to [off-list ref] --- arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 9 ++++++++- arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 4 ++-- 2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
index 4cb996d..e8801fa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts@@ -178,7 +178,14 @@ &qspi { status = "okay"; - qflash0: s25fl008k { + flash0: s25fl256s1 at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; + flash2: s25fl256s1 at 2 { #address-cells = <1>; #size-cells = <1>; compatible = "st,m25p80";
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index 2b23d03..65e612a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi@@ -318,7 +318,7 @@ dspi: dspi at 2100000 { status = "disabled"; - compatible = "fsl,vf610-dspi"; + compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x2100000 0x0 0x10000>;
@@ -444,7 +444,7 @@ qspi: quadspi at 20c0000 { status = "disabled"; - compatible = "fsl,vf610-qspi"; + compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; #address-cells = <1>; #size-cells = <0>; reg = <0x0 0x20c0000 0x0 0x10000>,
--
2.1.0.27.g96db324