[PATCH v2 08/18] dt-bindings: Add PLX Technology Reset Controller bindings
From: Neil Armstrong <hidden>
Date: 2016-03-09 10:27:49
Also in:
linux-devicetree, lkml
Subsystem:
open firmware and flattened device tree bindings, reset controller framework, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Philipp Zabel, Linus Torvalds
Signed-off-by: Neil Armstrong <redacted> --- .../devicetree/bindings/reset/plxtech,reset.txt | 58 ++++++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/plxtech,reset.txt
diff --git a/Documentation/devicetree/bindings/reset/plxtech,reset.txt b/Documentation/devicetree/bindings/reset/plxtech,reset.txt
new file mode 100644
index 0000000..581c974
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/plxtech,reset.txt@@ -0,0 +1,58 @@ +PLX Technology OXNAS SoC Family RESET Controller +================================================ + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Required properties: +- compatible: Should be "oxsemi,ox810se-reset" +- #reset-cells: 1, see below + +Parent node should have the following properties : +- compatible: Should be "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd" + +For OX810SE, the indices are : + - 0 : ARM + - 1 : COPRO + - 2 : Reserved + - 3 : Reserved + - 4 : USBHS + - 5 : USBHSPHY + - 6 : MAC + - 7 : PCI + - 8 : DMA + - 9 : DPE + - 10 : DDR + - 11 : SATA + - 12 : SATA_LINK + - 13 : SATA_PHY + - 14 : Reserved + - 15 : NAND + - 16 : GPIO + - 17 : UART1 + - 18 : UART2 + - 19 : MISC + - 20 : I2S + - 21 : AHB_MON + - 22 : UART3 + - 23 : UART4 + - 24 : SGDMA + - 25 : Reserved + - 26 : Reserved + - 27 : Reserved + - 28 : Reserved + - 29 : Reserved + - 30 : Reserved + - 31 : BUS + +example: + +sys: sys-ctrl at 000000 { + compatible = "oxsemi,ox810se-sys-ctrl", "syscon", "simple-mfd"; + reg = <0x000000 0x100000>; + + reset: reset-controller { + compatible = "oxsemi,ox810se-reset"; + #reset-cells = <1>; + }; +};
--
1.9.1