[PATCH 09/16] mtd: nand: sunxi: let the NAND controller control the CE line
From: Boris Brezillon <hidden>
Date: 2016-03-07 16:21:28
Also in:
lkml
Subsystem:
memory technology devices (mtd), nand flash subsystem, the rest · Maintainers:
Miquel Raynal, Richard Weinberger, Vignesh Raghavendra, Linus Torvalds
We don't need to manually toggle the CE line since the controller handles it for us. Moreover, keeping the CE line low when interacting with a DDR NAND can be problematic (data loss in some corner cases). Signed-off-by: Boris Brezillon <redacted> --- drivers/mtd/nand/sunxi_nand.c | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index db5446e..25a167f 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c@@ -515,21 +515,11 @@ static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat, struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand); struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller); int ret; - u32 tmp; ret = sunxi_nfc_wait_cmd_fifo_empty(nfc); if (ret) return; - if (ctrl & NAND_CTRL_CHANGE) { - tmp = readl(nfc->regs + NFC_REG_CTL); - if (ctrl & NAND_NCE) - tmp |= NFC_CE_CTL; - else - tmp &= ~NFC_CE_CTL; - writel(tmp, nfc->regs + NFC_REG_CTL); - } - if (dat == NAND_CMD_NONE && (ctrl & NAND_NCE) && !(ctrl & (NAND_CLE | NAND_ALE))) { u32 cmd = 0;
--
2.1.4