[PATCH v3 08/13] ARM: dts: sun8i-a83t: Add R_PIO controller node to the dtsi
flat view
STALE3865d
SUPERSEDED
From: Vishnu Patekar <hidden>
Date: 2016-03-05 15:44:51
Also in:
linux-clk, linux-devicetree, linux-gpio, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Revision v3 of 4 in this series.
Revisions (4)
- v1 [diff vs current]
- v2 [diff vs current]
- v3 current
- v4 [diff vs current]
Now that we have a driver for the R_PIO controller, add the corresponding device node to the dtsi. Signed-off-by: Vishnu Patekar <redacted> --- arch/arm/boot/dts/sun8i-a83t.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 691bbf1..5d240b9 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi@@ -465,5 +465,17 @@ compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; + + r_pio: pinctrl at 01f02c00 { + compatible = "allwinner,sun8i-a83t-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>; + resets = <&apb0_reset 0>; + gpio-controller; + interrupt-controller; + #interrupt-cells = <3>; + #gpio-cells = <3>; + }; }; };
--
1.9.1