[PATCH 68/70] ARM: dts: marzen: Enable SCIF_CLK frequency and pins
From: Simon Horman <hidden>
Date: 2016-02-04 14:30:02
Also in:
linux-renesas-soc
Subsystem:
the rest · Maintainer:
Linus Torvalds
From: Geert Uytterhoeven <geert+renesas@glider.be> Add and enable the external crystal for the SCIF_CLK and its pinctrl, to be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF. This increases the range and accuracy of supported baud rates. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <redacted> --- arch/arm/boot/dts/r8a7779-marzen.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts
index fe396c8d58db..e111d35d02ae 100644
--- a/arch/arm/boot/dts/r8a7779-marzen.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen.dts@@ -165,6 +165,9 @@ }; &pfc { + pinctrl-0 = <&scif_clk_pins>; + pinctrl-names = "default"; + du_pins: du { du0 { renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
@@ -176,6 +179,11 @@ }; }; + scif_clk_pins: scif_clk { + renesas,groups = "scif_clk_b"; + renesas,function = "scif_clk"; + }; + ethernet_pins: ethernet { intc { renesas,groups = "intc_irq1_b";
@@ -222,6 +230,11 @@ status = "okay"; }; +&scif_clk { + clock-frequency = <14745600>; + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default";
--
2.7.0.rc3.207.g0ac5344