Hi,
On Sun, 21 Feb 2016 12:29:53 +0100 Michael Trimarchi wrote:
quoted hunk ↗ jump to hunk
Add support for GPMI nand controller.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
---
Changes V2:
- drop special IMXUL type because seems that is compatible
with IMX6Q
arch/arm/boot/dts/imx6ul.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index f4daf97..1a486ac 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -142,6 +142,39 @@
reg = <0x00900000 0x20000>;
};
+ dma_apbh: dma-apbh at 01804000 {
+ compatible = "fsl,imx6ul-dma-apbh", "fsl,imx28-dma-apbh";
+ reg = <0x01804000 0x2000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
+ #dma-cells = <1>;
+ dma-channels = <4>;
+ clocks = <&clks IMX6UL_CLK_APBHDMA>;
+ };
+
+ gpmi: gpmi-nand at 01806000 {
+ compatible = "fsl,imx6q-gpmi-nand";
You should still add an imx6ul specific compatible (likewise to the
dma_apbh).
Lothar Wa?mann