[PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support
From: michael@amarulasolutions.com (Michael Trimarchi)
Date: 2016-02-20 17:19:28
Also in:
linux-devicetree
Possibly related (same subject, not in this thread)
- 2016-02-20 · Re: [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support · Fabio Estevam <hidden>
- 2016-02-20 · [PATCH 4/4] ARM: dts: imx6ul-geam: Add Engicam IMX6UL GEA M6UL initial support · Michael Trimarchi <hidden>
Hi Fabio On Sat, Feb 20, 2016 at 12:11:14PM -0200, Fabio Estevam wrote:
On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi [off-list ref] wrote:quoted
+ reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on;These last two properties can be removed.
This map the phy connection. Regulator are really always on and they are always on Michael
quoted
+ }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on;Ditto.quoted
+ pinctrl_spi4: spi4grp { + fsl,pins = < + MX6UL_PAD_BOOT_MODE0__GPIO5_IO10 0x70a1 + MX6UL_PAD_BOOT_MODE1__GPIO5_IO11 0x70a1 + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x70a1 + MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x80000000 + >; + };pinctrl_spi4 seems to be unused.
-- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com |