[PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support
From: michael@amarulasolutions.com (Michael Trimarchi)
Date: 2016-02-20 17:18:23
Also in:
linux-devicetree
Possibly related (same subject, not in this thread)
- 2016-02-20 · Re: [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support · Fabio Estevam <hidden>
- 2016-02-20 · [PATCH 1/4] ARM: dts: imx6ul: Add flexcan1 and flexcan2 support · Michael Trimarchi <hidden>
Hi Fabio On Sat, Feb 20, 2016 at 12:02:51PM -0200, Fabio Estevam wrote:
On Sat, Feb 20, 2016 at 8:20 AM, Michael Trimarchi [off-list ref] wrote:quoted
+ + flexcan1: can at 02090000 { + compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6UL_CLK_CAN1_IPG>, + <&clks IMX6UL_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + stop-mode = <&gpr 0x10 1 0x10 17>;This 'stop-mode' property is not handled in mainline, only in NXP kernel, so I suggest to drop this.
ok. Can you point me out to a driver in freescale source that use it? Michael -- | Michael Nazzareno Trimarchi Amarula Solutions BV | | COO - Founder Cruquiuskade 47 | | +31(0)851119172 Amsterdam 1018 AM NL | | [`as] http://www.amarulasolutions.com |