[PATCH v3 3/7] Documentation: bindings: document the Alpine MSIX driver
From: Antoine Tenart <hidden>
Date: 2016-02-19 15:23:53
Also in:
lkml
Subsystem:
irqchip drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Thomas Gleixner, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Following the addition of the Alpine MSIX driver, this patch adds the corresponding bindings documentation. Signed-off-by: Antoine Tenart <redacted> Signed-off-by: Tsahee Zidenberg <redacted> --- .../interrupt-controller/al,alpine-msix.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
diff --git a/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt
new file mode 100644
index 000000000000..f6f1c14bf99b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/al,alpine-msix.txt@@ -0,0 +1,26 @@ +Alpine MSIX controller + +See arm,gic-v3.txt for SPI and MSI definitions. + +Required properties: + +- compatible: should be "al,alpine-msix" +- reg: physical base address and size of the registers +- interrupt-parent: specifies the parent interrupt controller. +- interrupt-controller: identifies the node as an interrupt controller +- msi-controller: identifies the node as an PCI Message Signaled Interrupt + controller +- al,msi-base-spi: SPI base of the MSI frame +- al,msi-num-spis: number of SPIs assigned to the MSI frame, relative to SPI0 + +Example: + +msix: msix { + compatible = "al,alpine-msix"; + reg = <0x0 0xfbe00000 0x0 0x100000>; + interrupt-parent = <&gic>; + interrupt-controller; + msi-controller; + al,msi-base-spi = <160>; + al,msi-num-spis = <160>; +};
--
2.7.1