[PATCH 2/6] arm64: dts: Add SDHCI DT node for NS2
From: Anup Patel <hidden>
Date: 2016-02-10 06:11:18
Also in:
linux-devicetree, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
The IPROC SDHCI driver works fine for SDIO 3.0 on NS2 so let's enable it for NS2 SoC in NS2 DT. Signed-off-by: Anup Patel <redacted> Reviewed-by: Vikram Prakash <redacted> Reviewed-by: Ray Jui <rjui@broadcom.com> --- arch/arm64/boot/dts/broadcom/ns2-svk.dts | 4 ++++ arch/arm64/boot/dts/broadcom/ns2.dtsi | 18 ++++++++++++++++++ 2 files changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts
index 6bb3d4d..3321bd1 100644
--- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts
+++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts@@ -64,6 +64,10 @@ status = "ok"; }; +&sdio0 { + status = "ok"; +}; + &nand { nandcs at 0 { compatible = "brcm,nandcs";
diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi
index a510d3a..b1f352d 100644
--- a/arch/arm64/boot/dts/broadcom/ns2.dtsi
+++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi@@ -291,6 +291,24 @@ reg = <0x66220000 0x28>; }; + sdio0: sdhci at 66420000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x66420000 0x100>; + interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; + status = "disabled"; + }; + + sdio1: sdhci at 66430000 { + compatible = "brcm,sdhci-iproc-cygnus"; + reg = <0x66430000 0x100>; + interrupts = <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>; + bus-width = <8>; + clocks = <&genpll_sw BCM_NS2_GENPLL_SW_SDIO_CLK>; + status = "disabled"; + }; + nand: nand at 66460000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x66460000 0x600>,
--
1.9.1