[PATCH 07/11] ARM: dts: sunxi: Add dtsi file for AXP809 PMIC

On Tue, Feb 2, 2016 at 8:17 PM, Mark Brown [off-list ref] wrote:

On Tue, Feb 02, 2016 at 06:27:40PM +0800, Chen-Yu Tsai wrote:

quoted

+             reg_dcdc1: dcdc1 {
+                     regulator-name = "dcdc1";
+             };

Why is this generic DTS include specifying regulator names?

My intent is to provide better looking names by default.
I just realized I could do this in the driver by replacing
a few fields.

But I still might need to do this for the AXP806, which
is a slave PMIC also used with A80 SoCs. The names overlap
with the AXP809. Allwinner gets around this by adding a
"s_" prefix to them. I suppose that works too.

Mark, may I assume you are OK with this DTS include listing
the regulators, even if their sections are empty?

quoted

+             reg_rtc_ldo: rtc_ldo {
+                     /* RTC_LDO is a fixed, always-on regulator */
+                     regulator-always-on;
+                     regulator-min-microvolt = <1800000>;
+                     regulator-max-microvolt = <1800000>;

If the regulator itself is limited in this way there is no need to
specify this in the DTS.

Will remove.

Thanks
ChenYu