Thread (16 messages) 16 messages, 5 authors, 2016-02-23

[PATCH 0/4] Add Ethernet support on STM32F429

From: Giuseppe CAVALLARO <hidden>
Date: 2016-02-03 15:22:14
Also in: lkml, netdev

Hello Alex

On 2/3/2016 3:54 PM, Alexandre TORGUE wrote:
STM32F429 Chip embeds a Synopsys 3.50a MAC IP.
This series:
	-enhance current stmmac driver to control it (code already available) and
	 adds basic glue for STM32F429 chip.
	-Enable basic Net config in kernel.

Note that DT patches are not present because STM32 pinctrl code is not
yet avalaible.
patches look ok for me

Acked-by: Giuseppe Cavallaro <redacted>
Regards

Alexandre

Alexandre TORGUE (4):
   net: ethernet: dwmac: add Ethernet glue logic for stm32 chip
   Documentation: Bindings: Add STM32 DWMAC glue
   net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP
   ARM: STM32: Enable Ethernet in stm32_defconfig

  .../devicetree/bindings/net/stm32-dwmac.txt        |  41 +++++
  arch/arm/configs/stm32_defconfig                   |   9 ++
  drivers/net/ethernet/stmicro/stmmac/Kconfig        |  12 ++
  drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
  drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c  | 177 +++++++++++++++++++++
  .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   1 +
  6 files changed, 241 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt
  create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help